Polyurethane Structural Adhesives DELO-PUR

DELO-PUR are two-part cold cured polyurethane structural adhesives available in 1:1 DELO-AUTOMIX cartridges, and suitable for a multitude of high strength applications where flexibility is required.

DELO-PUR polyurethane adhesive products are Black, two part mineral filled, which offer an initial handling strength of 1 – 2 MPa from 10 minutes and up to 20 MPa after 24 hours, although curing can be accelerated dramatically with the introduction of heat.

They can be used in temperatures from –40ºC to +100deg C and have excellent chemical stability.  Polyurethane's are tough with elastic properties and offer good strength under static and dynamic conditions. The polyurethane adhesives are also suitable for large gaps due to high run resistance.

The Polyurethane adhesives are available in 50 & 200mil DELO-AUTOMIX double cartridges and part A and B 25kg drums for larger volume applications. Manual & pneumatic dispense guns for the DELO-AUTOMIX cartridges are also available.

Selection Chart		DELO-PUR Selection Chart (50Kb)
Product	Viscosity	Description	Datasheet
9691	80,000	Black mineral filled Polyurethane, fastcuring reaction time, hard after cure	208Kb
9692	Pasty	Black mineral filled Polyurethane, very short curing reaction time, hard after cure	208Kb
9694	Pasty	Black mineral filled Polyurethane, fast curing, high strength with good elasticity	207Kb
9895	Pasty	Black mineral filled Polyurethane, very hear tear resistance and firm after cure	207Kb
Applications / Uses		Gap Filling - Small & Large High Strength Bonding - Stress Equalising High Impact Applications Sealing Securing
Industry Segments: ng		Mechanical Engineering Electronics Electrical Engineering Plastic Processing
Technical Advice		enquiries@inseto.co.uk
Delo Website