| |
Two
Part Cold Cured Epoxy Resin Adhesive DELO-DUOPOX
 DELO-DUOPOX
are two part cold cured epoxy resin adhesives, for bonding, casting
and sealing of joints. Two component epoxy resin adhesives are high
strength materials, which can be used where curing with heat is
not an option. Epoxies exhibit excellent adhesion to many materials
and are ideal with stressed or extreme conditions. Industry applications
for epoxies include: automotive, mechanical engineering, civil engineering,
electrical engineering, energy and environmental engineering.
Two
part Duopox epoxies, cure when the two components are mixed together
in the correct ratio. Product dependant, most versions are available
in DELO-AUTOMIX
cartridges, which present the two epoxy components (resin and activator)
in the correct ratio to a dispensing / mixing canulla.
A
wide range of curing properties are available, with rapid cure versions
that are firm to touch in less than 10 minutes, to versions that
are firm to touch in 8 hours. They offer high chemical resistance
and are available in a wide range of viscosities.
| Selection
Chart |
 DELO-DUOPOX
Structural Adhesives (50Kb) |
| Product |
Viscosity |
Description |
Datasheet |
| 01Rapid |
- |
Two
part epoxies, cold cured, yellowish-transparent, firm in 10mins
|
186Kb |
| 02Rapid |
12,000 |
Two
part epoxies, cold cured, yellowish-transparent, firm in 12mins,
Automix |
212Kb |
| 03Rapid |
15,000 |
Two
part epoxies, cold cured, yellowish-transparent, firm in 11mins,
Automix |
210Kb |
| 03Rapid |
38,000
Thix |
Thixotropic
version epoxies of 03 Rapid, high run-off resistance, fast
curing, Automix |
211Kb |
| AD821 |
21,000 |
Two
part epoxies, cold cured, yellowish, flexible, good flow,
Automix |
212Kb |
| AD850 |
60,000 |
Two
part epoxies, cold cured, brown, mineral filled, flexible,
good to metal, Automix |
212Kb |
| AD894 |
16,000 |
Two
part epoxies, cold cured, black mineral filled, good flow,
tough / hard, Automix |
207Kb |
| AD895 |
90,000 |
Two
part epoxies, cold cured, grey mineral filled, high strength,
Automix |
213Kb |
| AD897 |
Pasty |
Two
part epoxies, cold cured, grey mineral filled, firm, Automix |
187Kb |
| Selection
Chart |
DELO-DUOPOX
Casting Resins (46Kb) |
| Product |
Viscosity |
Description |
Datasheet |
| CR804 |
1,000 |
Two
part epoxies, cold cured, yellowish, flexible, stress compensating,
good flow |
203Kb |
| AD821 |
23,000 |
Two
part epoxies, cold cured, yellowish, very flexible, low post
cure with temp |
204Kb |
| 6892 |
18,500 |
Two
part epoxies, cold cured, grey, steel filled, compound / compressive
strength |
206Kb |
| 6950 |
1,000 |
Two
part epoxies, cold cured, black, unfilled, cohesive and flexible |
204Kb |
| 6963 |
5,000 |
Two
part epoxies, cold cured, beige, mineral filled, temp resistant,
universal use |
206Kb |
| Applications
/ Uses |
Structural
Adhesives - High Strength, High Reliability Mechanical Joining
Casting
Resins - Casting, Filling, Potting & Encapsulation |
| Industry
Segments:
processing |
Mechanical
Engineering
Metal
Processing
Electronics
Automotive Engineering
|
| Technical
Advice |
enquiries@inseto.co.uk |
| Delo
Website |
 |
|
-
UV & Light Cured Adhesives