Inseto
Polyurethane Adhesives - DELO-PUR
DELO-PUR are two-part cold cured structural polyurethane adhesives available in 1:1 DELO-AUTOMIX cartridges, and suitable for a multitude of high strength applications where flexibility is required.
DELO-PUR polyurethane structural adhesive products are Black, two part mineral filled, which offer an initial handling strength of 1 – 2 MPa from 10 minutes and up to 20 MPa after 24 hours, although curing can be accelerated dramatically with the introduction of heat.
They can be used in temperatures from –40ºC to +100deg C and have excellent chemical stability. Polyurethane's are tough with elastic properties and offer good strength under static and dynamic conditions. The polyurethane adhesives are also suitable for large gaps due to high run resistance.
The Polyurethane adhesives are available in 50 & 200mil DELO-AUTOMIX double cartridges and part A and B 25kg drums for larger volume applications. Manual & pneumatic dispense guns for the DELO-AUTOMIX cartridges are also available.
| Selection Chart | 
DELO-PUR Selection Chart (50Kb) |
||
| Product | Viscosity | Description | Datasheet |
9691 |
80,000 |
Black mineral filled
Polyurethane, fastcuring reaction time, hard after cure |
205Kb |
9692 |
Pasty |
Black
mineral filled Polyurethane, very short curing reaction time,
hard after cure |
205Kb |
9694 |
Pasty |
Black mineral filled
Polyurethane, fast curing, high strength with good elasticity |
205Kb |
9895 |
Pasty |
Black
mineral filled Polyurethane, very hear tear resistance and firm
after cure |
205Kb |
| Applications & Uses | Gapp Filling - Large &
Small, High Strength Bonding - Stress Equalising, High Impact
Applications, Sealing & Securing |
||
| Industry Segments | Mechanical & Electrical
Engineering, Electronics & Processing |
||
| Technical Advice | |||
| Region | Available from Inseto in the
United Kingdom & Ireland |
||
