Two Part Epoxies that cure at room temperature, 2 component epoxy adhesives - DELO-DUOPOX

TWO PART EPOXY RESINS: DELO-DUOPOX

  • Fast curing at room temperature
  • Low-high viscosities and gap-fill versions available
  • Uniform stress distribution with long-term durability
  • Excellent adhesion to similar and dissimilar substrates

DELO-DUOPOX are two part epoxy resin adhesives for bonding, casting and sealing of joints. Providing excellent adhesion to many materials, these two part epoxies are ideal in stressed or extreme conditions, including automotive and engineering applications.

Two part epoxies are cold-cured, high-strength materials, which can be used where curing with heat is not an option. They cure when the two components are mixed together in the correct ratio. Product dependant, most versions are available in DELO-AUTOMIX cartridges, which present the two epoxy components (resin and hardener) in the correct ratio via a dispensing / mixing cannula.

A wide range of curing properties are available, with rapid cure versions that are firm to touch in less than 10 minutes, to versions that are firm to touch in 8 hours. They offer high chemical resistance and are available in a wide range of viscosities.

DELO-DUOPOX Structural Adhesives

Product

Viscosity

Description

Download

Product

01Rapid

Viscosity

-

Description

Two part epoxy, cold cured, yellowish-transparent, firm in 10mins

Product

02Rapid

Viscosity

12,000

Description

Two part epoxy, cold cured, yellowish-transparent, firm in 12mins, available in Automix cartirdges

Product

03Rapid

Viscosity

15,000

Description

Two part epoxy, cold cured, yellowish-transparent, firm in 11mins, available in Automix cartirdges

Product

03RapidThix

Viscosity

38,000Thix

Description

Thixotropic version epoxy of 03 Rapid, high run-off resistance, fast curing, available in Automix cartirdges

Product

AD821

Viscosity

21,000

Description

Two part epoxy, cold cured, yellowish, flexible, good flow, available in Automix cartirdges

Product

AD840

Viscosity

High

Description

Two part epoxy, cold cured, dark grey, mineral filled, Automix, meets requirements of UL94 HB & ISO 10993-5 for Cytoxicity, good chemical resistance

Product

AD848

Viscosity

Very High

Description

Two part epoxy, cold cured, dark grey, mineral filled, available in Automix cartirdges, meets requirements of ISO 10993-5 for Cytoxicity, good chemical resistance

Product

AD894

Viscosity

16,000

Description

Two part epoxy, cold cured, black mineral filled, good flow, tough / hard, available in Automix cartirdges

Product

AD895

Viscosity

90,000

Description

Two part epoxy, cold cured, grey mineral filled, high strength, available in Automix cartirdges

Product

AD897

Viscosity

Pasty

Description

Two part epoxy, cold cured, grey mineral filled, firm, available in Automix cartirdges

DELO-DUOPOX Casting Resins

Product

CR716

Viscosity

Low

Description

Two part epoxy, heat cured, black, mineral filled, suitable for large volume encapsulation especially in electrical engineering applications

Product

CR804

Viscosity

1,000

Description

Two part epoxy, cold cured, yellowish, flexible, stress compensating, good flow

Product

CR805

Viscosity

Low

Description

Two part epoxy, cold cured, black, unfilled, suitable for large volume encapsulation especially in electrical engineering applications

Product

CR844

Viscosity

Medium

Description

Two part epoxy, cold cured, dark grey, mineral filled, Automix, general purpose encapsulant with high temperature and chemical resistance

FURTHER INFORMATION & REQUEST FORM:

Contact Us

Tel: +44 (0)1264 334505

Email: enquiries@inseto.co.uk

Applications

Structural Adhesives - High Strength, High Reliability Mechanical Joining, Casting Resins - Casting, Filling, Potting & Encapsulation

Industry Segments

Mechanical Engineering, Metal Processing, Electronics, Automotive Engineering, Industrial & Consumer Assemblies

DELO Website

Region

Available from Inseto in the United Kingdom & Ireland

Full Name

Company

Country

Email

Message

Telephone:
+44 (0)1264 334505

Email:
enquiries@inseto.co.uk

ISO 9001 Certificate No. 12416